|Tape Width||0-20 mm|
|Tape Length||10-20 m|
|Country of Origin||Made in India|
- Tear and temperature resistant tapes with excellent abrasion resistance and high mechanical strength.
- Interface insulation holding and general insulations of coils and transformers.
- Good impregnability for traction machines.
- Cable harnessing at high temperature.
- Slot edge reinforcement.
- Outer wrap and core insulation of ignition coil in two wheeler and three wheelers.
Nomex# / Kapton# / Teflon# are Class H materials in combination with special adhesive is as excellent insulator. Nomex Adhesive tape with Synthetic rubber and Acrylic Adhesive are ideally suited for general transformer manufacturing industries. Owns flame Resistant property due to Nomex backing. Kapton Adhesive Tape with acrylic and silicone adhesive are ideally suited for insulation at very high temperature and for high stress conditions in traction machine manufacturing. Kapton tape has short- term heat resistance, upto 400 Degreec. Teflon Adhesive Tape with silicone adhesive has heat bond ability, good flexibility, good resistance to chemical, excellent releasing properties and short-term heat resistance upto 275 Degreec. Teflon Adhesive Tapes find its use in traction motor manufacturing.
- Electrical Motors
- Traction Machine Manufacturing
- Insulation Or Bar Wound Armature
|Adhesive Type||Rubber Adhesive|
|Breakdown Voltage||5500 Volt|
|Colour of Adhisive||White Adhesive on Yellow Colour|
|Adhesion To Steel||3.0 N/cm|
|Adhesion to Backing||2.5 N/cm|
|Tensile Strength||45 N/cm|
|Operating Temperature Range||130deg C|
|Base Material||Polyester Film with Yellow colour|
|Adhesive Coating||Single Faced|
Self Adhesive polyester film based Tapes encompass a wide field of Electrical insulation class B In the manufacture of capacitors and transformers for sealing the inner coil and for final wrapping.Available in variety of colours and widths. For core and layer insulation of transformers. CG-PPI CG1026, CG 1016 and CG 1028 are available with partial adhesive coating and fringing as per customers specification.Printed polyester tapes are available as per customer's specification, for capacitor & coil application.
Self Adhesive tapes on polyester film are also available with combinations such as paper, Glass fibre and polyester non-woven. This laminated Substrate tapes have an excellent strength , greater tear strength and very high tensile strength in both directions.These tapes are ideally suited for phase insulation and outer wraps of motor coils. Special combinations are also available on request as per customers specifications.
- General purpose insulations
- Transformer windings
- Coil windings
- Cable jointing
- Final wrapping of cast resin
- Film and foil capacitors